Friday, July 13, 2007

Winding the Chelsea Ship's Bell Clock

One of the most common questions we receive is regarding the winding of ship's bell clocks. These instructions are for the Chelsea Ship's Bell Clock model:


Wind your ship's bell clock fully once each week at approximately the same time, on the same day. The left hand winding arbor is for the strike-side mainspring and the right hand winding arbor is for the time-side mainspring. Be sure to wind both fully starting with the left side. VERY IMPORTANT - If the clock has run down, it must be wound FIRST before setting the hands. If the minute hand is locked, this is an indication that the levers are jammed. To release, simply wind the clock fully on both sides and then move the minute hand backwards 1 hour or more. Then reset the time allowing the clock to strike at the hour and the half hour.

BellClocks
a Divsion of Windward Instruments

0 Comments:

Post a Comment

<< Home